pico Technology PicoScope 2000 Serie Guia Del Usuario página 9

Ocultar thumbs Ver también para PicoScope 2000 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
User's Guide
Take care to avoid mechanical stress or tight bend radii for all connected leads. Mishandling will
cause deformation and will degrade performance and measurement accuracy.
2.5
Environment
This product is suitable for indoor or outdoor use, in dry locations only.
Please contact Pico technical support if you would like any advice on integrating a PicoScope into
your own product or application.
To prevent injury or death, do not use in wet or damp conditions, or near explosive gas or vapor.
To prevent damage, always use and store your oscilloscope in appropriate environments.
Temperature
Humidity
(non-condensing)
Altitude
Pollution degree
EMC
2.6
Care of the product
The product contains no user‑serviceable parts. Repair, servicing, and adjustment require
specialized test equipment and must only be performed by Pico Technology or an approved service
provider. There may be a charge for these services unless covered by the Pico five‑year warranty.
Inspect the instrument and all probes, connectors, cables and accessories before use for signs of
damage.
To prevent injury or death, do not use the product or an accessory if it appears to be damaged in
any way, and stop use immediately if you are concerned by any abnormal operations.
To prevent electric shock do not tamper with or disassemble the oscilloscope, case parts,
connectors or accessories.
When cleaning the oscilloscope, use a soft cloth and a solution of mild soap or detergent in
water. To prevent electric shock, do not allow liquids to enter the oscilloscope casing, as this will
compromise the electronics or insulation inside.
DO231-11
Copyright © 2006–2022 Pico Technology Ltd. All rights reserved.
WARNING
Storage
–20 °C to +60 °C
5 to 95 %RH
(non-condensing)
EN61326-1 basic immunity. The radiated and conducted RF signals
prescribed by this standard may cause interference of up to 4 vertical
WARNING
PicoScope 2000 Series Oscilloscopes and MSOs
CAUTION
CAUTION
Operating
0 °C to 50 °C
(non-condensing)
2000 m (maximum)
2 (maximum)
divisions peak to peak.
Quoted accuracy
15 °C to 30 °C
5 to 80 %RH
5
Tabla de contenido
loading

Tabla de contenido