Tenda 5G03 Guía De Instalación Rápida página 47

Q3: I cannot access the web UI of the router by visiting
tendawifi.com. What should I do?
A3: Try the following solutions.
If you log in with a wireless device:
Ensure that your wireless device is connected to the Wi-Fi
network of the router.
Disable the cellular network of your wireless device.
Clear the cache of your web browser or change another
web browser and try again.
If you log in with a wired device:
Ensure that the computer has connected to the router
properly.
Ensure that the IP address of your computer is 192.168.0.X
(X ranges from 2 to 254). If not, unplug and replug one end
of the Ethernet cable between the router and the computer,
and try again.
Clear the cache of your web browser or change another
web browser and try again.
If the problem persists, reset the router (hold down the RST
button for about 8 seconds) and configure it again.
Q4: Why cannot I find the Wi-Fi signal of the router?
A4: Connect your computer to port LAN1 or WAN/LAN2 of the
router to log in to the web UI. Navigate to Wi-Fi Settings >
Wi-Fi Name & Password:
Ensure that the wireless function is enabled. If not, enable it
and save the setting. Search for the Wi-Fi signal again on
your mobile phone.
Ensure that the Hide function is deselected. If not, deselect
it and save the setting. Search for the Wi-Fi signal again on
your mobile phone.
- 46 -