Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.5 Ophthalmic Insert
WARNING – PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE
HAZARD: Always load or unload
Three-level
Ophthalmic
with Removable Upper Insert –
Long on appropriate loading cart
or surface.
Loading Instructions
The upper section of the ophthalmic rack is designed to hold
cannulated ophthalmic instruments and suction tubes using rack
components (instrument holders, Luer locks, hollow jets, etc.).
Furthermore, it can also accommodate four ophthalmic baskets to
process non-cannulated ophthalmic instruments.
The ophthalmic insert may hold the following items:
•
4 bimanual irrigation handpieces holder
•
4 bimanual aspiration handpieces holder
•
4 phako instrument holder
•
4 micro tweezers instruments holder
•
16 hollow jets Ø 4x60 mm for cannulated instruments
•
4 hollow jets Ø 4x59 mm for cannulated instruments
•
8 hollow jets Ø 4x50 mm for cannulated instruments
•
20 luer-locks male, 4 Luer locks female for cannulated
instruments
•
4 phako tip holder
•
4 quick tip I/A holder
•
7 bulldog instruments holder
•
8 holders for biom lens
To load the ophthalmic insert, proceed as follows.
1. Prepare empty Ophthalmic insert. Mount Ophthalmic insert onto
base rack (if not already done).
Rack
2. Pre-load ophthalmic baskets with appropriate instruments;
vitrectomy ophthalmic instrument set is loaded on ophthalmic
insert.
Figure 2-7. Virectomy Ophthalmic Instrument Set
Operator Manual
2-7
10095339
Tabla de contenido
