FitNord Seal One Manual Del Usuario página 11

3. Begin inflating by attaching the pump hose into the valve. Press gently and turn
clockwise. For best results, partially inflate both the bottom and sides, leaving them a
bit soft. When the kayak starts taking shape, fully inflate the bottom first and then the
sides.
4. Max pressure for the bottom is 1 bar (15 PSI), but often only 8-10 PSI is needed for
desired stiffness. Max pressure for the sides is 0,2 bar (3 PSI).
NOTE!
Don't exceed the maximum pressure!
The pressure gauge located on top of the pump will tell the pressure. Inflating the
kayak takes about 5-15 minutes. It is advisable to use the whole body to avoid getting
your hands tired.
EN EN
11