Basic Use; Pairing - Miracle-Ear LINK Table Mic AV Manual Del Usuario

Basic Use

Basic Use
1. To turn onMiracle-EarLINK
Mic AV, press the power button.
2. The green segments indicate the
battery charge level.
3. Ensure your hearing aids are
powered on.
Note: Prior to streaming audio
for the first time, your hearing
aids will need to be paired to
the Miracle-EarLINK
AV. Refer to Pairing with Hearing
Aids "Pairing" on page 13.
4. To start audio streaming, open the Miracle-Ear
and select Start Streaming from Accessories screen.
Refer to Start/Stop Audio Streaming
on page 20 for additional
options.
5. To adjust the stream volume, press
the + or - button.
6. To stop streaming turn off the
Miracle-EarLINK Table Mic AV
™
Refer to Start/Stop Audio
Streaming on page 20 for additional options.
12
Table
™
Table Mic
™
app
®
.

Pairing

For the Miracle-EarLINK Table Mic AV to interact with
™
your hearing aids, you must first pair it with each hearing
aid. You only need to perform this action once, as the
Miracle-EarLINK Table Mic AV and hearing aids should
™
automatically recognize each other when both are powered
on and within wireless operating range.*
To pair the Miracle-EarLINK
hearing aids:
1. Ensure your hearing aids are not connected to nearby
Bluetooth devices. To do this,
®
• Disable Bluetooth on your mobile phone.
• Power off any nearby any other nearby
Miracle-EarLINK Accessories, which you previously
™
paired to your hearing aids.
• Power off, then power on your hearing aids.
Note: For a CROS hearing aid system, power off
both your hearing aid and CROS transmitter.
Power on only your hearing aid, ensuring the CROS
transmitter remains powered off.
*Typical operating range is up to 10 meters (~30 feet). Operational range may be
reduced by environmental factors, such as obstructions, interference, and human
body positioning. Larger operational distances are achievable, though audio quality
and connectivity may decrease.
Pairing
Table Mic AV with your
™
13