ARC'TERYX BORA PACK Manual Del Usuario página 28

STEP 3
Remove the hipbelt following the removal instructions on page 23.
Ensure the slider was inserted with the TPU bumper facing the
top of the pack. Next, inspect the TPU bumper found inside the
hole on the end of the slider opposite of the bearing cap. If it's still
there and not damaged, reinstall the hipbelt carefully following the
hipbelt installation instructions on page 24. Check the RotoGlide™
mechanism to see if it slides smoothly and is noise-free.
If the TPU bumper is damaged or missing, or if the RotoGlide™
mechanism isn't fully functional after troubleshooting using
these three steps, please contact Arc'teryx Customer Service for
additional help. (see page 1)
27