Safety Information; Technical Data; Cleaning; Maintenance - Scheppach UMF1600 Traducción Del Manual De Instrucciones Original

Do not use the universal machine stand as a ladder
or as scaffolding. Ensure that all handgrips, nuts and
screws are tightened before use. The maximum pay-
load is 200 kg. Ensure that the universal machine
stand is on a level, firm and stable floor.
Any use beyond this is improper use. The manufac-
turer is not responsible for the resultant damages, the
user bears this risk alone.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.

4. Safety information

• Use the universal machine stand only in conjunction
with suitable electric power tools!
• Check the universal machine stand for damage
each time before use. Electric power tools shall not
be mounted or operated on damaged support arms
/ crossbars.
• Electric power tools must be bolted to the support
arms / crossbars and be secured on the universal
machine stand!
• Always ensure the universal machine stand is se-
cure when setting it up.
• Always ensure that you assume a natural and safe
standing position when working.
• Do not overload the universal machine stand! Do not
use the universal machine stand for purposes for
which it is not intended.
• Modifications or unauthorised changes to the uni-
versal machine stand as well as the use of unap-
proved parts is forbidden.
• All parts of the universal machine stand, in particular
the safety devices, must be correctly mounted in or-
der to guarantee trouble-free operation.
• Keep the universal machine stand out of reach of
children. Store the device in a location that is inac-
cessible to unauthorised persons and children.
m Attention!
When using electric power tools, in conjunction with the
universal machine stand, the respective machine-spe-
cific safety measures must be implemented as protec-
tion against electric shock, and the risk of injury or fire.
Read all of the instructions for the electric power tool that
you intend to mount and operate before using the tool.
12 | GB
Safety instructions for the electric device mounted
must likewise be observed.
Store these safety instructions safely.
Observe all safety instructions. If you disregard the
safety instructions, you endanger yourself and others.

5. Technical data

Dimensions
(L x W x H)
Load
Weight

6. Cleaning

m Important!
Before any cleaning or maintenance work, the electri-
cal tool fitted must be switched off and the mains plug
pulled out! Risk of injury!
Cleaning
• Keep the universal machine stand as free of dust
and dirt as possible. Rub the universal machine
stand clean with a clean cloth or blow it off with com-
pressed air at low pressure.
• We recommend that you clean the universal ma-
chine stand immediately after every use.
• Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents - they could attack the plastic
parts of the universal machine stand.
7.

Maintenance

General maintenance measures
• We recommend that you clean the equipment im-
mediately after you use it.
• Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plastic
parts in the equipment. Ensure that no water can
get into the interior of the equipment.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consum-
ables.
www.scheppach.com
1000-1650 x 580 x 810-910
mm
200 kg
12.5 kg