Trust ZCO-900 Manual Del Usuario página 8

EN ZCO-900 ZIGBEE CARBON MONOXIDE DETECTOR
1. REMOVE BATTERY PULL STRIP
A
Remove the detector from the mounting bracket by twisting it.
B
Pull the battery pull strip out of the CO detector. After removing
the battery pull strip, the CO detector will beep and will warm
up (can take up to 2 min). (See LED function table)
2. INDICATORS
The CO detector contains an LED indicator light to indicate
the status. Look below for the meaning of the different LED
indications.
LED FUNCTION TABLE
Warming up
Connected
successfully
Detector reset
Test
Alarm
Operation of
CO detector
8
LED light flashes red, green and yellow
LED will light up for 3 sec (The App will also indicate when
the connection is successful)
LED will flash 6x
LED light flashes 4x fast red and the detector beeps 4x
LED light flashes red and the detector beeps 4x (85 db)
every 5 seconds. The detector stops as soon as no more
CO is detected
The LED light flashes 1x green every 30 seconds to
indicate that the CO alarm is working properly