Instructions; Before Using - Retekess TD175 Manual Del Usuario

Instructions

1.Before Using

Please charge the pagers for
more than 10 minutes before
2.Paring Operation (F1)
On the charging mode
Press [Set] key to enter setting mode,
the F1 is shown on display.
The charging indicator flashes quickly during
charging and stays on when fully charged
Press [Call] key to enter the paring mode, the
charging indicators on pagers will turn off, and other
indicators will turn on. 000 shows on the display
02
Remove a pager from the charging
slot, and enter a desired number
(1-998) through the keyboard within 10s
3.Call Pager
Enter the desired number, then
press [Call] key to confirm
Press [Call] key to confirm, the pager beeps,
paring is done
Note: 1) Repeat above steps (3 and 4)
to pair other pagers
2) Press[Back] key twice to
exit the setting mode
the corresponding pager will beep,
vibrate and flash.
03