Additional Settings - Harvia Xenio WiFi CX001WIFI Manual De Instrucciones

ADDITIONAL SETTINGS

EN
Figure 3b. Settings menu structure, additional settings.
46
Control unit standby
I/O buttons' background lights glow on the control panel.
Open the settings menu by simultaneously pressing the buttons
and . Press for 5 seconds.
Note! The buttons do not glow when the control unit is in standby mode.
Setting the remote use
The remote use setting can be changed with the
options are "OFF" (remote control disabled), "SAFE" (safety switch) and
"door" (door switch).
(See section » REMOTE USE for further information).
Confirm the selection with the MENU button.
Select either heater HEAt or combi (=heater and steamer, CO) to be
controlled remotely.
Confirm the selection with the MENU button.
Setting pause time (6 h)
"RESt" appears on the display and after a while "On" or "OFF". Enable or
disable the pause time feature with buttons
be enabled, if the control unit is remotely started by an automated schedule
(e.g. a weekly timer).
Press the MENU button to access the next setting.
Maximum on-time » More detailed instructions www.harvia.com
Sensor reading adjustment » More detailed instructions www.harvia.com
Memory for power failures » More detailed instructions www.harvia.com
Sauna dehumidifying interval » More detailed instructions www.harvia.com
Temperature unit » More detailed instructions www.harvia.com
WIFI connection
Connect control panel to WiFi network by using the MyHarvia application.
See MyHarvia application for more detailed instructions.
OFF »The WiFi connection is off.
On » The WiFi connections is on.
COnn » Connect mode is active.
Press the MENU button. The control unit switches to standby mode.
,
and buttons. The
and . Pause time must