Function Of The Unit; Overview (A); Assembly, Initial Operation, Setting (B-C); Use - Rothenberger ROTIGER CL Instrucciones De Uso

4

Function of the Unit

4.1 Overview
Clamping bolt
1
Guide
2
Saw blade clamping fixture
3
LED working light
4
Lever of the saw blade clamping fixture
5
Front handle
6
Switch on catch button
7
4.2 Assembly, Initial Operation, Setting
Remove the battery pack from the machine before any adjustment or maintenance is
carried out!
Battery pack:
Removal:
 Press the battery pack release (11) button and pull the battery pack (12) forwards.
Inserting:
 Slide in the battery pack (12) until it engages.
Inserting, removing saw blade (B):
Do not touch the saw blade immediately following operation of the tool, as it can be
extremely hot and can lead to skin burns!
 Pull up lever (5) of saw blade quick-clamping device upwards and hold in this position.
 Insert the saw blade as far as it will go or remove it.
 Release lever (5).
 Check that the saw blade is securely seated.
Fitting the chain tube holder (C1):
 Loosen the clamping bolt (1).
 Push the ROTIGER CL onto the chain tube holder (13) up to the stop so that the clamping
bolt (1) can be fixed in the groove.
 Use the clamping bolt to clamp the chain tube holder in place.
4.3

Use

Switching on and off, stroke rate:
Switch-on lock (7):
Trigger (9) locked.
Trigger (9) unlocked.
Switching on, speed: press the trigger switch (9). The stroke rate can be changed by pressing
in the trigger.
Switching off: Let go of the trigger switch (9).
Continuous activation: With the trigger (9) pressed, push in the locking button (8) and release
the trigger. Press and release the trigger (9) again to switch off.
In continuous operation, the machine continues running if it is forced out of your
hands. Therefore, always hold the machine with both hands using the handles
provided, stand securely and concentrate!
Stepless stroke rate setting:
The stroke rate can be changed steplessly by varying the pressure applied to the trigger switch
(9), thus adapting it to the material and working conditions.
20
Lock button (continuous operation)
8
Trigger
9
Rear handle
10
Battery pack release button
11
Battery pack
12
Chain tube holder
13
ENGLISH
(A)
(B-C)