PALSON Arabica Modo De Empleo página 9

PREHEATING
To make a good espresso coffee, we recommend preheating the electrical appliance before making coffee, including
the filter holder, the filter and the cup, no that the cold parts do not spoil the coffee flavour.
1. Remove the tank and open its cover to fill it with the required amount of water. The water level should not exceed
the "MAX" mark on the tank. Then put the tank into the appliance properly.
2. Put the filter into the filter holder, and make sure that the filter holder handle is lined up with the front of the
appliance. Then put the filter holder into the electrical appliance in the "Insertar" and release the pressure flange,
and place it inside the coffee maker turning it anticlockwise until it snaps shut.
3. Put a coffee cup on the detachable tray.
4. Then plug the electrical appliance in. Make sure that the steam selector is in the minimum position.
5. Turn the I/O to the lowest position. The red light will turn on. Make sure that the coffee/steam button is in the highest
position, position .
6. The preheating has finished when the green light turns on.
HOW TO MAKE AN EXPRESSO
1. Remove the filter holder turning it clockwise. Put ground coffee into the filter with the measuring spoon and then
flatten it with the flattening spoon.
2. Put the filter into the filter holder. Make sure that the filter holder tube is lined up with the front of the electrical
appliance. Then put the filter holder into the electrical appliance in the "Insertar" and release the pressure flange
(17), and place it inside the coffee maker turning it anticlockwise until it snaps shut.
3. Put a preheated cup on the drip tray (9).
4. The green light will turn on at this moment. If the green light turns off, wait for a moment. When the green light has
come on, you should turn the pump control button to the lowest position, position "P". If you wait for a moment, the
coffee will come out.
Note: If the green light turns off with the machine working, you should close the pump and stop making espresso
coffee, as the machine is heating up. If the green light turns on again after a few seconds, you can continue to make
coffee turning the pump control button to position "P". The green light will turn on and off to tell you when the water
temperature is high enough.
5. You should manually turn the I/O to the highest position, position "O", when the required amount of coffee has been
obtained or when the colour of the coffee is slightly different.
WARNING: Do not neglect the coffee maker when it is operating as you may have to intervene manually.
6. When it finishes making the coffee, remove the filter holder clockwise, and then empty the coffee grounds pushing
the filter with the pressure flange (17).
7. Leave it to cool down completely. You can now clean the coffee maker and its accessories.
HOW TO MAKE A CAPUCCINO
1. First prepare the espresso with a big enough cup, and make sure that the steam selector is in the minimum
position.
2. Turn the coffee/steam button to the lowest position, position
Note: If the green light turns off when the machine is working, you should turn the steam selector to the minimum
position. Then turn the coffee/steam button to the highest position, position
to the lowest position, position "P". After 30 seconds, turn the coffee/steam button to the lowest position, position
again. Wait until the green light turns on and turn the steam selector anticlockwise. The steam will come out
again.
3. Fill a jar with around 100 ml of milk per cappuccino you are going to make. We recommend using milk from the
fridge (not hot milk!).
Note: When you have to choose the size of the jug, bear in mind that the milk doubles its volume, so make sure
that the jug is tall enough.
4. Put the steam rod with the rubber nozzle a couple of centimetres into the milk. Then slowly turn the steam selector
anticlockwise. The steam will come out. Pour the froth moving the jug whilst making circles.
Note: Never turn the steam selector off abruptly, as the steam quickly accumulates in a short time and could cause
a potential explosion.
5. When you have finished, you can turn the steam selector to position "O".
Note: Clean the steam outlet with a damp sponge immediately after making steam.
6. Pour the frothy milk into the espresso coffee. The cappuccino is now ready, and you can sprinkle a little ground
chocolate on top of the froth if you wish.
7. Turn the I/O button to the highest position, position "0", to unplug the machine from the generator.
All manuals and user guides at all-guides.com
, and wait until the green light turns on.
, and turn the pump control button
9