Bionix OtoClear Instrucciones De Uso página 7

Aquabot TROUBLESHOOTING CHART
®
PROBLEM
Lid O-ring is missing
Unit does not build Pump Barrel is too loose
or hold pressure
Pinch Tube is kinked
Builds pressure but
does not spray
Umbrella Valve is not
Water is getting inside of
pump barrel
Pump Barrel is too loose
Pinch Tube is damaged
Water is leaking from
under trigger
Soft Nozzle is missing
Water is leaking from
under trigger
Mist is not fine
Operating mode is in Pulse
Spray is too noisy Operating mode is in Pulse
12
REASON SOLUTION
Replacement parts available
at lunatecgear.com
Tighten Pump Barrel
Email
Something else [email protected]
or call 858.653.0401
Remove trigger and unkink
Pinch Tube
Email
Something else [email protected]
or call 858.653.0401
Replacement parts available
sealing at lunatecgear.com
Tighten Pump Barrel
Replacement parts available
at lunatecgear.com
Email
Something else [email protected]
or call 858.653.0401
Replacement parts available
at lunatecgear.com
Wear and tear on Replacement parts available
Soft Nozzle at lunatecgear.com
Email
Something else [email protected]
or call 858.653.0401
Try sanding 0.5mm off the
open side of the Nozzle Cap.
Wear and tear
If that doesn't work,
order a new Nozzle Cap.
Switch to Stealth mode
Email
Something else [email protected]
or call 858.653.0401
Switch to Stealth mode
Medical Device
Manufacturer
Date of manufacture
Use-By Date
Lot Code
Reorder Number
Serial number
Sterilized using
irradiation
Do Not Resterilize
Non-sterile
Do Not Use if Package is
Damaged
Do Not Reuse
Single-Use Device
Single patient-
multiple use
Consult Instructions
For Use (IFU)
Caution
Warning
Authorized representative
in the European Commu-
nity
European Conformity
Prescription Only or
"For Use by or on the order
of a licensed medical pro-
fessional"
Temperature limitation
13