Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Please note: The remote control can be safely stored in the ap-
propriate compartment (A11).
DESCRIPTION OF THE REMOTE CONTROL
D1. ON/STANDBY button
D2. MODE button
D3. Decrease button
D4. Increase button
D5. Fan speed selection key (MIN/MED/MAX/AUTO/ARCTIC
WHISPER EXTREME)
D6. Swing button
D7. Timer button
D8. UV-Carelight button
D9. ECO REAL FEEL button
D1
D9
D3
C17
D5
C15
C17
C8
D7
C15
C10
C8
C10
C14
C14
C16
TURNING THE APPLIANCE ON/OFF
•
Plug into the outlet.
C16
•
Press the
button (D1) to turn the unit on.
C3
When turned on, the air conditioner starts operating in the
same mode as when it was turned off .
C3
C2
•
To switch the appliance off, press the
Please note: Never switch the appliance off by removing the
C2
plug. Always switch it off by pushing the
a few minutes before removing the plug. Only in this way will
the appliance be able to perform its standard checks.
SELECTING THE OPERATING MODES
To select the desired operating mode, press repeatedly the
MODE button (D2) until the desired function is selected.
Most of the commands available on the remote control corre-
spond to those on the appliance control panel (C).
SELECTING THE TEMPERATURE
In air conditioning mode, press
crease/increase the desired temperature.
D
C5
D2
C6
C7
D4
C9
D8
C12
D6
C13
C11
C4
C1
button (D1) .
button and waiting
(D3) and
(D4) keys to de-
SELECTING THE AIR FLOW AND ARCTIC WHISPER
EXTREME
In air conditioning and fan modes, press
mote control to increase/decrease the desired air flow. If you
wish to set the Arctic Whisper Extreme function, press the same
button (D5) until the related symbol (C12) is displayed. (see
page 8 for further details).
SWING FUNCTION
The swing button (D6) activates and deactivates the swing fun-
ction. When the internal fan is running, the swing function di-
stributes the air evenly into the room moving the flap forwards
and backwards alternatively. If pressed again, the flap will be
locked into its current position. NOTE: If the internal fan is not
running, the swing function will also not operate. In order to avoid
C5
damaging the internal mechanisms, the flap must not be moved
C6
manually.
C7
C5
C6
C9
SETTING THE TIMER
C7
C9
C12
C12
C13
C13
C11
The timer allows the delayed start up or shut down of the appli-
C11
C4
ance. This function will prevent wasting electricity by optimizing
the operating periods.
C4
C1
How to program delayed shut down
C1
•
While the appliance is on in any operating mode, delayed
C17
shut down can be programmed.
C15
•
Press the
C8
and hours (C14) light up.
C10
•
Press the
number of hours to shut down appears on the display.
C14
A few seconds after the timer is set, the setting is memorized
and the display shows the operating mode and the timer symbol
stays lit. Once the set time is elapsed, the air conditioner goes
C16
into standby. To cancel the timer program, press the
button (D7) twice. The timer symbol (C15) will go off.
Note: Once the timer has been activated, by pressing the timer button
C3
only one time, the remaining hours until shut down will be displayed.
10
C2
UV-C
C5
C6
C7
timer button (D7), the timer symbol (C15)
C9
(D3) and
(D4) buttons until the desired
C12
C13
C17
C15
C11
C8
C10
C4
C14
C1
(D5) button on re-
C5
C6
C7
timer
C9
C12
C13
Tabla de contenido
