Instructions For Safe Operation - Lifetime Air FF-400A Manual De Instrucciones

INSTRUCTIONS FOR SAFE OPERATION

1. Fan should be used only at rated voltage. This fan is
designed for a AC220-240V 50Hz electric supply.
2. Never insert fingers or any other object through the fan guard
when fan is running.
3. Unplug when not in use, or when moving fan from one
location to another, and before putting on or taking off parts
and before cleaning.
4. Do not put your fingers through the openings. Do not let
children put any objects into the front case.
5. Do not use this fan outside or in a damp area such as
bathroom.
6. Do not place the electrical cord under a cover. Do not overlay
the cord with little covers or such element. Place the cord in
an area where there is no risk to stumble.
7. The fan must always be unplugged when not operating. To
unplug the heater, all the switches must be on the position
"OFF", and then the plug could be disconnected.
8. Do not operate the fan in an area where gasoline is used
or stocked, painting or such flammable liquids.
9. If you need to move the fan, switch off and unplug it.
10. If you need maintenance, please send the fan back to the
agent.
11. No part of this fan must be replaced by the user.
12. The fan should not be opened up by the user.
13. Be sure not to allow water or other liquid to enter the inside of
motor.
14. The fan must be placed on a flat surface.
15. Need to check the power cord and plug is damaged regularly.
lf it's damaged, must replace the power cord or plug by the
manufacturer or a qualified expert agency to avoid hazards.
16. The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their