Uline H-7058 Instrucciones De Montaje página 2

4. Place tabletop panels (4) upside down on a smooth,
non-marring surface and push flat ends together.
Insert eight camlock pins (A) and six dowels (C).
(See Figure 2)
Figure 2
C
A
C
5. Insert eight camlocks (B) into corresponding holes
on modesty panels (3). With three people, place
the assembled base on the tabletop panels (4). Turn
each camlock (B) clockwise until it locks. Cover
each camlock (B) with a deep camlock cap (H).
(See Figure 3)
Figure 3
H
1
PAGE 2 OF 9
ASSEMBLY CONTINUED
A
4
Tighten
1
B
4
C
A
1
2 3
4
3
4
6. Attach an L-Bracket (E) to each outside leg (1) and
secure to the corresponding tabletop panel (4)
using four M4 x 16 mm screws (F) per bracket.
Tighten screws with Phillips screwdriver. (See Figure 4)
7. Attach an L-Bracket (E) to each side of the center leg
(2) and secure to the corresponding tabletop panel
(4) using four M4 x 16 mm screws (F) per bracket.
Tighten screws with Phillips screwdriver. (See Figure 4)
NOTE: Ensure at least one L-Bracket connects
each outside leg (1) to the corresponding
tabletop panel (4) and the center leg (2) is
connected to both tabletop panels (4).
(See Figure 4)
NOTE: L-Bracket holes can be started with drill
(optional).
Figure 4
Tighten
1
F
E
1
4
1
2 3
4
3
4
0421 IH-7058