Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT DATASHEET
Description
Model identification
Brand
Product code
Type of plate
Number of zones and/or cooking areas
Heating technology (induction cooking
zones and areas, conventional cooking zones,
electric hobs)
For circular cooking zones or areas: diameter
of the useful surface per electric cooking
zone, rounded off to the nearest 5 mm
Energy consumption per cooking zone or
area calculated per kg
Energy
consumption
of
the
hotplate,
calculated per kg
INSTALLATION
•
Place the plate on a stable, heat-resistant surface in a location where it will not get
splashed with water.
•
The worktop must be dry and heat-resistant.
•
Position the appliance so that the plug is easily accessible.
•
This appliance must not be integrated into and used in furniture units.
•
The edges of the appliance may become hot when in use. You are advised to leave a space
of at least 10 cm around the appliance.
•
Before connecting the plate, always make sure that the thermostat knob is in the MIN
position.
•
Make sure that there are no foreign objects such as water or food on the hotplate before
using it.
V.1.0
Symbol
Value
Unit
RS L3b
Listo
8008062
Electric hotplate
1
Electric plate
ø
180
mm
EC
193.54
Wh/kg
electric cooking
EC
193.54
Wh/kg
electric plate
16
BEFORE FIRST USE
•
Remove all of the packaging.
•
Before first use, the invisible protective coating must be removed. To do this, heat the
hotplate on its own for 4 minutes at maximum temperature. A slight odour and a little
smoke may be released during this process, but it will quickly disappear. Make sure the
room is well ventilated.
•
IMPORTANT: This must be the one and only time you use the hotplate on its own
(without a pan on it).
•
Turn off the plate and allow it to cool completely. The plate is now ready to be used.
OPERATING THE APPLIANCE
1.
Unwind the power cord completely and plug the appliance into an earthed wall outlet.
2.
Place the pan on the hotplate: always use flat-bottomed pans for better contact with the
hotplate. It is preferable to use a pan with a diameter similar to that of the hotplate. Do
not use a pan with a diameter of less than 15 cm. Also check that the pan is centred on the
hotplate and that the pan handle is in a safe position.
3.
To turn on the hotplate, turn the thermostat knob to the right. Then set the plate power
to the desired position (between MIN and MAX positions). The indicator light comes on.
Use the lowest settings (MIN to 4) to simmer and cook over a low heat, and the highest
setting (MAX) to boil.
4.
To turn off the plate, turn the thermostat knob to the MIN position and then unplug the
plate.
17
V.1.0
Tabla de contenido
