Motor Setup; Scan Mode; Loop Search; Angolo Calcolo - Maxital M-345 Manual De Uso

Press the blue key to scan current

3.5.9. Motor setup

There are 5 modes in motor setting
 USALS Motor control based on your local position, you can change
it in Calculation of the angle.

DiSEqC 1.2 There are 64 positions that you can select to move the
motor.

Set East Limit Move the motor to the East.

Set West Limit Move the motor to the West

Disable limits
Press the yellow button to start the TP search.
Press the blue key to recalculate the motor..

3.5.10. Scan mode

FTA only: Free-to-air mode or not.
Channel Search: TV + Radio, TV Channel and Optional Radio Channel.
Network Search: Use only in Full Scan mode.
Automatic search: Blind Scan and Full Scan optional.

3.5.11. LOOP Search

We can see 1 country / satellite and 8 channels when we enter
this interface ,
press ←→ key to change them.
There are 3 modes we can choose: DVB-S2, DVB-T2 and DVB-C, and press the yellow key to change
Press to start loop searching, and singal strenth and quality of each channel will be displayed on the
screen.

3.5.12. Angolo calcolo

Input satellite longitude, local longitude and latitude by number keys, and
the product will calculate the polarization angle, azimuth and elevation on
the top of the screen.
Press the red key to calibrate.
transponder.
11
M345 | USER MANUAL
it..