Detection Diagram - Shelly Motion 2 Guía De Uso

5. Attaching the stand
Insert the two L-shaped protrusions of the
stand (fig.1 E) swiveling arm into the Device
body oblong openings and then slide the
stand in a direction opposite the charging
port as shown in fig. 2.
6. Wall mounting
Use the stencil printed at the end of this
booklet to mark the wall where you want to
mount the Device.
Use screws with a head diameter between
5 and 8 mm.
⚠CAUTION!
indoor use only.
⚠CAUTION!
and moisture.
⚠CAUTION!
damp environment and avoid water splash-
ing.

DETECTION DIAGRAM

The detection area is shown on fig.3 A: Side
view and B: top view (not to scale).
⚠IMPORTANT!
tect movement through transparent objects.
⚠IMPORTANT!
heating sources can trigger false motion
detection.
LED INDICATION SIGNALS
Blue: AP mode
Blue brief flash: Settings changed
Blue flashing: Firmware update
Red brief flash: Motion detected and re-
ported
8
ENGLISH
The product is intended for
Protect the product from dirt
Do not use the product in a
Shelly Motion cannot de-
Direct sun light or close
User and Safety guide