Hoover H-Energy 700 HE730ALG 011 Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Main Cleaner
B. Bag Door
C. Exhaust Filter Cover
D. LED Display with power control,
Auto and Manual modes, bag check
indicator and filter cleaning indicator
D1. Auto mode activation button
D2. Manual mode activation button
E. On/Off Pedal
F. Cord Reel Pedal
G. Carry Handle
H. Bag
I. Bag Holder
J. Bag Door Release Latch
K. Hose
L. Telescopic Tube
L1. Telescopic Tube
Secure Connection
L2. Telescopic Tube Adjuster
M. Carpet and Floor Nozzle
Secure Connection
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release the hose: simply press the two latches on the hose end and pull. [1]
2. Connect the hose handle to the upper tube end. [2]
Connect the tube lower end to the carpet and floor nozzle**. [3**]
3.
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2. After connecting the telescopic tube lower end to Carpet and Floor Nozzle**, press
the floor type selector pedal on the nozzle to select the ideal cleaning mode for the
floor type. [4]
Hard Floor: Brushes are lowered to protect the floor.
Carpet: Brushes are raised for deeper cleaning.
*Certain Models Only ** May vary according to model
N. Carpet and Floor Nozzle (GP)**
O. Floor Type Selector Pedal
P. Nozzle Suction Control Slider
P1. MIN Mode
P2. MAX Mode
Q1. Pre-Motor Filter Frame
Q2. Pre-Motor Filter
R. Exhaust Filter
S. Hi-Controller Remote Control
Handle With Soft Grip**
Sa. Variable Power Control Buttons
Sb. Auto Mode On/Off Button
Sc. On/Off Button
Sd. Led Battery Indicator of
Handle's Remote Control
S1. Integrated Accessories onto
the handle: Crevice tool, Dusting
Brush and Furniture tool*
T. Mini Turbo Dual Action Allergen
Remover Nozzle*
U. Long 2in1 Tool*
V. Parquet Extra Care Nozzle*
3. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster
up and raise or lower the handle to the most comfortable cleaning position. [5**]
Carpet & Floor nozzle** :
- Hard Floor Cleaning: Press the pedal on the nozzle to switch to Hard Floor mode
and adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are lowered to protect hard floors. [4a]
- Standard Carpet: Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are raised. [4b]
- Long Pile Carpet: Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MIN (minimum). It can also be used
to reduce the operating push force. [4c]
4. Switch the cleaner on by pressing the On/Off Pedal on the cleaner main body [8] or
by pressing the On/Off button [Sc] onto the Hi-Controller Handle with Settings*. [9]
AUTO MODE FUNCTION:
This vacuum cleaner features smart sensors able to detect the amount of dust and debris
on your floors and automatically adjust the power level. When the cleaner detects a big
quantity of dust will increase the power. And when the cleaner recognizes the floor is
clean, the power will automatically decrease. The cleaner starts in AUTO MODE, on
display Auto Mode will be illuminated.
POWER LEVEL REGULATION:
Power level can be also regulated manually from the Hi-Controller Handle with Settings*
or from the cleaner control panel.
From the Hi-Controller Handle with Settings** [S] :
- AUTO MODE is illuminated on the display. Press AUTO MODE on/off button [Sb] on
the handle and +/- buttons [Sa] to adjust the power according to your need. On the
display MANUAL MODE will be illuminated.
- MANUAL MODE is illuminated on the display. Press AUTO MODE on/off button on
the handle to return to AUTO MODE function. [Sb]
From the cleaner control panel :
- Press MANUAL MODE Activation button on the control panel [D2], on display
Manual Mode will be illuminated. Then you can press the manual button to choose
the desired power setting. Press AUTO MODE Activation button to return to AUTO
MODE function.
5. Switch the cleaner off at the end of use by pressing the On/Off Pedal or On/Off
Button on the Hi-Controller Handle with Settings**. Unplug and rewind the power
cord by pressing the cord rewind pedal.
6. The tube can be parked for temporary storage while in use, or in the storage position
when not in use. [10]
2
GB