Start-Up And Operation - Blumfeldt Garden Hero Manual De Instrucciones

START-UP AND OPERATION

Cutting height adjustment
Set the cutting height
The first cut of the season or long thick wet grass will need the highest setting
(5.5 cm).
Gradually reduce to desired height once all ground has been covered. This may
take a few days or a few weeks. If the perimeter wire is pegged to the surface
of the garden rather than buried, it is a good idea to let the wire "bed in" to the
surface of the lawn, during which time it is advisable to keep the robot mower
on an elevated blade setting.
Note: During first few days of mowing the grass may look stripy or patchy
where the robot mower has covered/not covered. This is normal and will
become even after several days once the full lawn area has been mowed.
1. Open the knob lid.
2. Cutting height can be
adjusted from 2.5 cm to
5.5 cm by rotating the
adjustment knob.
EN
67