FONESTAR MX-867RU Manual De Usuario página 4

EN
INSTRUCTIONS FOR USE
INPUT CHANNEL ALLOCATION TO OUTPUT ZONES
- The input channels INPUT 2 to 5 and the USB/SD/MP3 player with digital FM tuner module can be
allocated independently to one or several output zones ZONE 1 to ZONE 4.
1
2
- Using the microswitches 1 to 4, you can select the zone to which the input channel signal will be sent.
3
Place the corresponding microswitch in the ON position to send that input signal to the desired zone.
For example, if you want input channel 3 to be heard in zones 1 and 2, microswitches 1 and 2 of INPUT
3 must be set in the ON position. If you want the USB/SD/MP3 player with digital FM tuner to be heard in
zones 1 and 4, the microswitches 1 and 4 of the USB/SD/MP3/FM module must be set in the ON position
INPUT PRIORITY
- The priority function automatically reduces the level of the inputs with lower priority so that the message
broadcast by those of higher priority can be clearly heard.
- In this case, the input with maximum priority is the dynamic microphone input INPUT 1 and it is activated
by signal level. To activate the priority function, the PRIORITY ON/OFF button located on the front panel
of the device should be pressed.
REMOTE CONTROL OF ZONES
- The remote control outputs REMOTE VOL allow the zone volume to be selected remotely with
a potentiometer installed in the output connector. The use of a 10 kΩ a 100 kΩ potentiometer is
recommended according to the following diagram:
10 k - 100 k
POTENCIOMETRE
1
2
3
CONNECTION
- Make the connections with the amplifier and PA power amplifi er of the system switched off and
disconnected from the power supply.
- Connect the audio devices or microphones desired to the corresponding inputs. If a dynamic microphone
is connected to inputs 2 or 3, set the sensitivity adjustment control GAIN close to its minimum. If a
condenser microphone is connected to inputs 2 or 3, also place this control in the same position and
activate the PHANTOM +48V selector.
1 3 2
PRIORITY
ON / OFF
ON OFF
10 k - 100 k
POTENCIOMETRE
ZONE
Z Z
PRIORITY PRIORITY
ON / OFF ON / OFF MIC MIC
1 1 2 3
INPUTS INPUTS INPUTS
~115 V AC, 50/60 Hz FUSE: T1.6 A 250 V
ZONE 4
~230 V AC, 50/60 Hz FUSE: T0.8 A 250 V
REMOTE
MIC VOL
1
FUSE
ON OFF
ZONE
1 3 2
1
2
3
- 4 -
MULTIZONE MIXER / PREAMPLIFIER MX-867RU
VOL-
FM RADIO & MP3 PLAYER
MODE EQ
SCAN CH+
Z
SIG SIG SIG SIG
4 Z1 Z2 Z3 Z4
ZONES
PRIORITY ON / OFF MIC
1
INPUTS
ZONE 3 ZONE 2 ZONE 1 FM ANT INPUT 4 INPUT 3
BAL. OUTPUT BAL. OUTPUT BAL. OUTPUT BAL. OUTPUT
REMOTE REMOTE REMOTE
VOL VOL VOL
~115 V AC, 50/60 Hz FUSE: T1.6 A 250 V
~230 V AC, 50/60 Hz FUSE: T0.8 A 250 V
PRIORITY
ON / OFF MIC
1
FUSE
1 3 2
Z Z1 Z2 Z3 Z4
VOL+ FM / MP3
AUX
MULTIZONE MIXER / PREAMPLIFIER MX-867RU
Z
INPUT 5
INPUTS MONITOR FM RADIO & MP3 PLAYER
Z Z Z
SIG SIG SIG SIG
2 3 4 Z1 Z2 Z3 Z4
ZONES
INPUT 2 INPUT 1 INPUT 1
GAIN GAIN
PHANTOM PHANTOM PHANTOM PHANTOM
+48 V +48 V ZONE 4 ZONE 3 ZONE 2 ZONE 1
BAL. OUTPUT BAL. OUTPUT BAL. OUTPUT BAL. OUTPUT
REMOTE REMOTE REMOTE REMOTE
VOL VOL VOL VOL
ZONE
Z
VOL- VOL+
FM / MP3
EQ AUX
MODE
SCAN CH+
Z
INPUT 5
INPUTS
FM ANT INPUT 4 INPUT 3 INPUT 2
GAIN
PHANTOM
+48 V