Remote Programming - KOOMANDO SOMMER 4013 Instrucciones De Uso

SOMMER 4013-4014
En
Instructions
Technical data
Radio frequency 868.8 / 434.42 MHz
Temperature range -10 ...+70 °C
Usage range dependent on environment,
approx. 50 m
Current consumption ca. 10 mA
Battery type CR 2032
Dimensions 87 x 24 x 17 mm
88 x 24 x 13 mm
Weight approx. 25 - 30 g
(incl. battery)
Operation
Each button or combination of buttons has its
own radio code.
Code transmission - manual remote control to radio receiver
There are 2-channel and 4-channel radio receivers; the one illustrated is a 4-channel model. SL-type
garage door drives are equipped with a 2-channel radio receiver.
1. Press learning button (A) on radio receiver
- 1x for channel 1, LED 1 lights up
- 2x for channel 2, LED 2 lights up
- 3x for channel 3, LED 3 lights up
- 4x for channel 4, LED 4 lights up
2. Press required manual remote control button (B). The manual remote control transmits the
given radio code to the radio receiver.
► Corresponding LED goes out according to the channel that has been selected.
3. Repeat the procedure mentioned under points 1 + 2 to program further manual remote controls on to
the given radio receiver.

Remote programming

This is not a standard feature of all Sommer receivers,
only applies to models manufactured after 2011.
Features
Having a radio control already coded on the receiver, it is possible to enable remote programming.
W A R N I N G !
All the receivers that are within the operating range of the radio control are put in the lear-
ning state!
If there are multiple receivers / control units within range of the radio control, do not use
this procedure.
4020-4026
S13065
www.koomando.com - remote control shop