Read This First; Getting Started - Bellman & Symfon BE1450 Manual De Usuario

Read this first

This booklet guides you on how to use and maintain your new Portable receiver. Ensure
you read this booklet carefully, including the
the most out of your product. If you have additional questions, contact your hearing
care professional.
Intended purpose
The intended purpose of the Visit system is to alert deaf and
hard of hearing people of important signals in their home.
Intended user
A person with mild to severe hearing loss or deafness.
Intended user group The intended user group consists of people of all ages with
mild to severe hearing loss or deafness that need audio, visual
or sensory amplification.
Principle of operation
The Visit alerting system consists of a set of wirelessly con-
nected transmitters and receivers that are located across the
home. When a transmitter detects an activity, it signals the Visit
receiver that alerts the user with sound, flashes or vibrations. In
order to use the system, you need at least one transmitter and
one receiver.
Overview
1 2 3 4
7
1 4
Power LED Visit LEDs
2 Volume dial 5 Flash signal switch
3 Flash LEDs 6 BE1270 Bed shaker
4
Warnings
section. This will help you get
5 6
8 9
7
Test button
8 Battery compartment
9 Optional power supply

Getting started

1 Slide open the battery cover, fit the batteries and close the cover again.
Place the receiver on a level surface or mount it on the wall using the wall bracket.
2 To test the radio link you need a Visit transmitter. Press the test button/s on
the transmitter.
3 The receiver lights up a Visit LED (4) and starts to flash and sound. If a bed shaker
(6) is connected, it will vibrate. A short press on the test button (7) repeats the last
indication. If nothing happens, see Troubleshooting.
1
Default signal pattern
When a transmitter is activated, the Portable receiver lights up a LED and begins to sound
and flash. If you have connected a bed shaker, it starts to vibrate with a certain pace. This is
called signal pattern. The transmitters determine the pattern, and the default is:
Transmitter Portable receiver
Activated source Visit LED
 Door transmitter Green
 Push button transmitter Green
 Telephone transmitter Yellow
 Baby monitor Orange
 Smoke alarm Red
 CO alarm Orange/red
2 3
Bed shaker
Sound Flash Vibration
Door chime Yes Slow
Door chime Yes Slow
Ring signal Yes Medium
Baby melody Yes Fast
Fire horn Yes Long
Emergency alert Yes Long
EN
5