Electrical Wiring Scheme - Orima OR-954-X Manual De Instrucciones

página de 110

/ 110
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

6. If you make a connection with a lexible metal hose, locate a seal

between the main gas pipes.

7. The inner diameter of the lexible hose, which the butane hose

nozzle is connected, should be 6mm for the house-type gas tubes. The

inner diameter of the lexible hose, which the natural hose nozzle is

connected, should be 15mm.The hose should tightly be itted to the

hose nozzle by squeezing with a clamp. The hose should be replaced

before its last expiry date.

8. Caution! Make the oven connection to the gas inlet valve, the hose

length must be short and be sure that there is no leakage. The lexible

hose used should not be longer than 125 cm for safety.

9. Re-inspect the gas connection.

10. When placing your oven to its location, ensure that it is at the

counter level. Bring it to the counter level by adjusting the feet if

necessary.

DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO

THROUGH THE HEATED AREAS, ESPECIALLY THROUGH THE REAR SIDE OF

THE OVEN. DO NOT MOVE GAS CONNECTED OVEN. SINCE THE FORCING

SHALL LOOSEN THE HOSE, GAS LEAKAGE MAY OCCUR.