Honeywell Home R200C-N1 Instalación Y Guía De Usuario página 10

usual siting considerations, special care should be taken with portable units to ensure that they are
always properly positioned in relation to the ambient air being sampled. In addition, the user should be
cautioned against intermittent operation of the apparatus and dropping or damaging it whilst being re-
located. Installation of an interconnected CO alarm should not be used as a substitute for proper
installation, use and maintenance of fuel burning appliances including appropriate ventilation and
exhaust systems. This interconnected CO alarm is not water resistant and is only suitable for indoor use.
Do not try to repair the interconnected CO alarm, it has the risk of electric shock or malfunction if the
interconnected CO alarm is tampered with. Do not expose the interconnected CO alarm and batteries to
extreme temperatures. Some common household substances can affect the sensitivity of the
interconnected CO alarm. Do not use household cleaners, polishes, perfumes or aerosol sprays on or
close to the interconnected CO alarm. Avoid the use of nail polish remover, model paint or model glue
close to the interconnected CO alarm. This interconnected CO alarm is designed to protect individuals
from the acute effects of carbon monoxide exposure. It will not fully safeguard individuals with specific
medical conditions. If in doubt consult a medical practitioner. Long exposure to low levels (>10 ppm) of
CO may cause chronic effects. If in doubt consult a medical practitioner.
14. Specifications
Gas detected
Lifetime
Power supply
Wireless frequency
TX power
Wireless distance
Installation
Dimensions
Weight
Audible
Sensor technology
Type of device
Operation Ambient Condition
Storage/Transport Ambient Condition
IP rating
: Carbon Monoxide
: 10 years
: Long life lithium battery, 3 V, sealed for the life of the product
(no replacement necessary)
: 868 MHz
: 8dbm
: ＞100 meters in free field
: Wall mount, ceiling
: 95 mm x 95 mm x 25 mm
: 120 g
: ≥85 dB @ 3 m
: Electrochemical Cell
: Type-B
: Temperature -10°C to +40°C
: Humidity 25 – 95% RH (non-condensing)
: Temperature -15°C to +45°C
: Humidity 20 – 95% RH (non-condensing)
: IP44
-10-