KTM 63512932044 Instrucciones De Montaje página 30

5 ASSEMBLY
10
–
Insert the key and check whether the tumblers with the
number 1 are correct.
Guideline
The tumblers must close flush with the locking cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
Info
It is recommended that you keep the numbers of
500517-01
the matching wafers so that subsequent locking
cylinders can be identically equipped.
–
Repeat the steps for chambers
first six chambers are fitted with the correct wafers.
–
Insert the key.
Guideline
The tumblers must close flush with the locking cylinder.
500518-01
–
Mount and tighten short locking cylinder adapter
screw (both included).
The holding lug of the locking cylinder adapter (see
arrow) is located on the opposite side of the engaging
plate
502801-01
–
Grease and mount the O-ring
Long-life grease (
–
Position and insert locking cylinder as shown.
The holding lug of the locking cylinder adapter is
facing downward.
Engaging plate
500558-01
–
Key in vertical position
The cases are locked and secured.
–
Move the key 90° to the right
The cases can be opened and closed.
–
Turn the key 45° clockwise
The handle pops up automatically.
The cases can be opened and closed.
The cases are released and can be mounted or taken
500531-01
off.
B D
,
8
.
4
(included).
p. 16)
8
engages.
G
.
H
.
I
.
F
, and until the
3
with