Cleaning The Tool - SNOWJOE SUNJOE 24V-HCSWP-LTE Manual De Instrucciones

19. Store indoors – When not in use, the power tool should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
20. Do not use the power tool if the trigger does not turn it
on and off. Any power tool that cannot be controlled is
dangerous and must be repaired.
21. Keep all parts of the body away from the chain. Do not
remove cut material or hold material to be cut while the chain
is moving. Make sure the switch is off when clearing jammed
material. The chain will continue moving for a while after the
tool is turned off. A moment of inattention while operating the
power tool may result in serious personal injury.
22. Carry the power tool by the handle with the chain
stopped. When transporting or storing the power tool,
always keep the chain and guide bar in the bar sheath.
Proper handling of the pole + pruning saw will reduce the
chance of personal injury.
23. Hold the product by insulated surfaces only. In the event
that the chain comes into contact with hidden wiring,
exposed metal parts of the product may become "live"
and give the operator an electric shock.
24. The unit has not been designed to provide protection
from electric shock in the event of contact with overhead
electric lines. Never use the power tool near any electrical
power lines. Contact with or use near power lines may
cause serious injury or electric shock resulting in death.
Maintain a minimum clearance of 50 ft (15 m) from all
power lines.
m
WARNING!
Before inspecting, cleaning, or servicing
the machine, remove the battery and wait for all moving parts
to stop. Failure to follow these instructions can result in serious
personal injury or property damage.
m
WARNING!
Do not use this appliance without reading
this instruction manual.
m
WARNING!
Do not use the appliance within range of
persons unless they are wearing protective clothing.
m
WARNING!
Do not operate the cordless power tool in a
tree, on a ladder, or on scaffolding. Using the tool under such
circumstances is extremely dangerous.
m
WARNING!
Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sufficient to inflict
serious injury.
m
WARNING!
The cordless pole + pruning saw must be
fully assembled before operation! Do not use the tool that is
only partly assembled or assembled with damaged parts!
m
WARNING!
Starting, stopping, and restarting an electric
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless power tool, always wait at least five seconds after
stopping before restarting the unit.
m
WARNING!
Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects. If
you find any, do not start up your machine and contact your
distributor.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Please contact an authorized Snow Joe
or call the Snow Joe + Sun Joe
®
at 1-866-SNOWJOE (1-866-766-9563) for all maintenance
or operations not foreseen in this manual. Any operation
performed in an unauthorized service center or by unqualified
personnel will completely invalidate the warranty.
m
WARNING!
For your safety and that of others:
• Correct maintenance is essential to maintain the original
efficiency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
m
WARNING!
Always wear protective gloves during
maintenance operations.
m
WARNING!
Use only original manufacturer's
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance. To order
genuine replacement parts or accessories for the Sun Joe
iON+ cordless pole + pruning saw, please visit sunjoe.com or
contact the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).

Cleaning the Tool

m
WARNING!
Never let any liquid get inside the motor
housing and NEVER immerse any part of the housing in liquid.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the tool, using a
damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as acetone.
Storage
m
WARNING!
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, solvents, etc.,
come in contact with plastic parts. Chemicals can damage,
weaken, or destroy plastic which may result in serious
personal injury.
1. Stop the motor and remove the battery.
2. Clean the pole + pruning saw thoroughly before storing.
2
+ Sun Joe dealer
® ®
customer service center
®
®
customer service center at
®