FONESTAR FO-20M44XT Manual De Instrucciones página 7

COMMAND
Status.
Save[Y].
Recall[Y].
Clear[Y].
PWON.
PWOFF. Switches the device off (matrix in standby mode and switches the receivers off)
STANDBY.
/%[Y]/[X]:[Z].
DigitAudioON[x].
DigitAudioOFF[x].
EDIDM[X]B[Y].
EDIDG[x].
EDIDMInt.
GetInPortEDID[x].
%0911.
%9951.
%9952.
%9953.
%9954.
%9955.
%9956.
%9957.
%9958.
%9961.
%9962.
%9964.
%9971.
%9972.
%9973.
%9974.
%9975.
Checks and informs on the connection status of the complete equipment
Saves the current configuration status in the memory position Y
Establishes the configuration saved in the memory position Y
Clears the configuration saved in the memory position Y
Puts the system in standby mode
(does not cut off the power supply to the receivers)
HDCP management command
[Y] is the value of input (I) or output (O)
[X] is the port number (1, 2, 3, 4, ALL)
[Z] is the compatible value (1) or incompatible (0) with HDCP
Enables the HDMI audio output of port [x]
[x] is the port number (1, 2, 3, 4, 5:ALL)
Disables the HDMI audio output of port [x]
[x] is the port number (1, 2, 3, 4, 5:ALL)
Allows the [Y] input to acquire EDID information from the output [X]
Obtains EDID data from the output [x]
Restores the EDID data of each input to default settings
Returns the EDID data from the input [x]
Restores the device to default settings
Checks the command sent by port 1 when the device is switched on
Checks the command sent by port 2 when the device is switched on
Checks the command sent by port 3 when the device is switched on
Checks the command sent by port 4 when the device is switched on
Checks the command sent by port 1 when the device is switched off
Checks the command sent by port 2 when the device is switched off
Checks the command sent by port 3 when the device is switched off
Checks the command sent by port 4 when the device is switched off
Checks the locked/unlocked status of the device
Checks the device status (on, standby mode or off)
Checks the connection status of the inputs
Checks the connection status of the outputs
Checks the HDCP status of the inputs
Checks the HDCP status of the outputs
Checks the connection status of the inputs/outputs
FUNCTION
(Y range: 0 to 9)
Switches the device on
Manual EDID switching
Checks the device IP address
- 7 -
EN