Mounting The Fascia Door; Important - Fulgor Milano FBC 345 TNF ED Manual De Usuario

EN

Mounting the fascia door

• Ensure that there is a gap of 3 to 4mm between the non-
hinged side and the cabinet wall.
• Locate the slider in the bracket and fix the slider to the fascia
door 20 to 22mm from the edge of the fascia as shown in
following pic., ensuring that the slider is positioned centrally
and horizontally within the bracket. Tighten securely by
hand.
• Fill the gap on the non-hinged side with the gasket/seal strip
provided.
• The finished look for the door sliders should be similar
to those shown in following pic., which shows 2 sliders
inplace.
Ensure the appliance doors open, close and seal properly.
Once complete, and if you are happy with the fit of the
appliance in the cabinet, bend and snap the parts of the white
spacers marked 'S' as shown by the dotted outline. Leave the
rest of the spacer cover in place over the metal plates.
Gasket
16
Fig. 11
Fig. 12
Fig. 13
Fig 14

IMPORTANT

After completing the installation, check that the
appliance is secured within the unit and that the
door(s) close and open properly. Ifthere is no
resistance from the door seals when opening the
doors, then it is probable that the appliance and/
or decor doors are not fitted properly.
Decor door