Control Panel - Fulgor Milano FBC 345 TNF ED Manual De Usuario

5 - Control panel

EN
1. First time of switching on the appliance, this appliance
always works at settings: 5˚C for fridge, 0˚C for My Zone
and -18˚C for freezer. If you want to adjust the temperature
or functions manually, press the button to conduct the
operations. Temperature ranges of adapt zone from -3˚C
to 3˚C.
2. Fridge temperature adjustment –press button
part of control panel to achieve different temperatures
from 2˚C to 8˚C.
3. Freezer temperature adjustment –press button
part of control panel to achieve different temperatures
from -15˚C to -25˚C.
4. My Zone drawer adjustment function: this button
controls "My Zone" temperature. By pressing on this
button, the digit will go from -3˚C to +3˚C. This function
can be on/off by continuously pressing for three seconds
(shows OFF).
5. Fast cooling function –Press button
illumines and fast cooling function is turned on, fridge
starts to work automatically at temperature setting 2˚C and
quits after 24 hours, light of symbol eliminates.
6. Holiday function–Press button
holiday function is turned on and whole appliance starts to
work automatically at settings: fridge at 17˚C and freezer
at -18˚C. My Zone works as previously set.
7. Eco function – Press button
is turned on and button illuminates, fridge compartment
works at setting 5˚C and freezer compartment works at
setting of -18˚C.The adapt zone works at setting of 0˚C.
8. Fast freezing function – Press button
illumines and freezer start to work at fast freezing function,
temperature setting -25˚C. After 24 hours, fast freezing
function quits automatically.
9. Press button for 3 seconds to switch off your appliance
and the button illumines, power is cut off. Internal lamps
eliminate, compressor stops working. Pressthe button
for 3 seconds to switch on your appliance, the symbol
illumined and power is connected again.
10
Fig. 3
on left
on right
, light of button
, light of button illumines,
on control panel, eco function
, light of button
10. On the no frost models, there is a function: compulsive
defrosting. Press the buttons
switch on the compulsive defrosting function to clean the
freezer evaporator and digitals of freezer temperature
shine. Press the button
the compulsive defrosting function , and the digitals of
freezer temperature eliminate. 10 Fault display.
This appliance has 'fault display & alarm' function. Once the
sensors got fault, there are alarms displayed on the temperature
displaying, the appliance still cools but professional service
engineer should be called and check the appliance.
F1 – Sensor of fridge evaporator
F2 – Sensor of adapt zone
F3 – Sensor of fridge apartment
F4 – Sensor of freezer compartment
F5 – Sensor of defrosting
2E – Fault of fan/motor in freezer
CE – Communication fault between main panel and display
panel.
The above Errors only show on display, no voice Over
temperature alarm in freezer: after freezer temperature arrives
at the set temperature, after that, if the temperature rises to
>-1 ˚C, the alarm will start, accompany with flash of freezer
temperature digit. Press any button to cancel the voice alarm.
The flash will remain until the temperature is <-1 ˚C.
PS: Main board locates in compressor compartment
Position Conditions
5 ˚C/-18 ˚C
Summer or ambient temperature
between 25-35 ˚C
5 ˚C/-18 ˚C
Spring,
temperature between 15--25 ˚C
5 ˚C/-18 ˚C
Winter, or ambient temperature
between 5-15 ˚C
Super freezing function
Quick freeze
Super cooling function
Super cooling
+ for 5 seconds to
+ 3 seconds to switch off
autumn or ambient