There is a 3 minutes delay on power on. In order to protect the life of the compressor and
COMPRESSOR
electronic components please do not switch on the unit for at least 5 minutes after you turned
PROTECTION
the unit off.
WIFI SETUP AND SMART FEATURES
WIFI SETUP
BEFORE YOU START
Ensure your router provides a standard 2.4 Ghz connection.
If your router is dual band ensure that both networks have different network names (SSID). The
provider of your router / Internet service provider will be able to provide advice specific to your
router.
Place the air conditioner as close as possible to the router during setup.
Once the app has been installed on your phone, turn off the data connection, and ensure your
phone is connected to your router via WIFI.
DOWNLOAD THE APP TO YOUR PHONE
Download the "SMART LIFE" app, from your chosen app store, using the QR codes below, or by
searching for the app in your chosen store.
CONNECTION METHODS AVAILABLE FOR SETUP
The air conditioner has two different setup modes, Quick Connection and AP connection (Access
Point). The quick connection is a quick and simple way to set the unit up. The AP connection uses a
direct local WIFI connection between your phone and the air conditioner to upload the network
details.
In Standby mode press and hold the speed button for 3 seconds (until you hear a bleep) to enter
the wifi connection mode.
Please ensure your device is in the correct wifi connection mode for the connection type you are
attempting, the flashing of the wifi light on your air conditioner will indicate this.
Connection Type
Quick Connection
AP Connection (Access Point)
Frequency of Flashes
Flash
es twice per second
Fla
shes once per three seconds
51