Blumfeldt Flagranti Plus Manual De Instrucciones página 37

Connecting to a gas cylinder
• Use max.13kg gas cylinder. Please refer to your gas supplier for suitable
gas cylinder.
• Refer to your gas supplier for instructions on the use of your gas cylinder.
• Only change gas cylinders outdoors or in a well ventilated area away from
naked flames and any other source of ignition.
• The gas cylinder must always be used in an upright position.
• Close the appliance control knob by turning fully clockwise.
• Close the gas cylinder tap and then attach the regulator onto the gas
cylinder.
• Tighten all connections firmly and with a spanner where appropriate. The
cylinder should be located on the cylinder base.
• Check for leaks at all joints using soapy water. If a leak is found, tighten the
joint and then re-test.
Securing a gas cylinder
1 Position a gas cylinder inside the tank housing.
2 Stick cylinder restraint straps together as RIGHT photo illustrated. The
straps must be in a proper tightness for the gas cylinder.
Caution: Please take care that the cylinder restraint straps. DO NOT strain the
regulator assembly.
EN
37