WERKU WK401630 Instrucciones Originales página 2

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
ENG
CE DECLARATION CONFORMITY.
Werku
declares that the WK401630 cordless
®
demolition hammer drill is in accordance with the
European Directives and Standards 2006/42/CE,
EN60745-1:2009/A11:2010 and EN60745-2-6:2010.
La Coruña, 04/01/2021
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
20V max
4.0 AH Li-ion
Protection index IP20
min
Electronic
Reversible
-1
Impacts 0-4700 ipm
SDS PLUS
Wood drilling capacity < 34 mm
Metal drilling capacity 14 mm
capacity 18 mm
Acoustic pressure LpA 84 dB(A)
Respective uncertainity KpA 3 dB(A)
pressure LwA 96 dB(A)
KwA 3 dB(A)
Vibration Ah 1.64 m/s²
uncertainity K 1.5 m/s²
total value has been measured in accordance
with a standard test method and may be used
for comparing one power tool with another
declared vibration total value may also be used in a
preliminary assessment of exposure
vibration emission during actual use can differ from
the declared total value depending on the ways in
which this cordless drill is used
identify safety measures to protect the operator,
based on an estimation of exposure in the actual
conditions of use.
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this cordless demolition hammer drill for other
applications than those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
and dark areas invite accidents
Battery
Battery charge 2 h
Speed rate 0-1150
Impact function
Chisel shank system
Concrete drilling
Acoustic
Respective uncertainity
Respective
The declared vibration
Warning; the
Warning; please
Keep all warnings and all
Accidents can be
Cluttered
Do not handle
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
Keep away from children and curious while
operating a power tool
you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
common sense when operating a power tool
not use a power tool while being tired or under
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal damage.
USE PPE'S.
Use protection glasses according EN166
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
hair, clothing and gloves away from moving parts
Loose clothes, jewelry or long hair can be caught
The
in moving parts
means for extracting and collecting dust, make sure
they are connected and properly used
these devices can reduce dust related hazards.
ELECTRICAL SAFETY.
Hold this cordless demolition hammer drill by
insulated gripping surfaces, when performing
an operation where the drill bit may contact a
hidden wiring
may make exposed metal parts of this cordless
demolition hammer drill "live" and could give
the operator an electric shock
the power tool must match with the base of the
socket
not use any adapter plug with earthed power
tools
Unmodified plugs and matching bases
will reduce the risk of electric shock
Do not
contact with grounded surfaces such as pipes,
radiators, cookers and refrigerators
an increased risk of electric shock if your body is
grounded
wet conditions
increase the risk of electric shock.
2
English
Distractions can cause
This enables better control of the power
If there are devices for connecting
A drill bit contacting a "live" wire
Never modify the plug in any way
Do not expose power tools to rain or
Water entering the power tool will
Do
A
Use
If required by
Keep your
The use of
The plug of
Do
Avoid body
There is
loading