Outsunny B31-390 Manual De Instrucciones página 7

5.
 Carefully unhook the fan from the mounting bracket
(A) and align the locking slots of the fan-motor assembly
(B) with the two screws (II) in the mounting bracket (A).
Push up to engage the slots and turn clockwise to lock in
place. Immediately tighten the two mounting screws
firmly.
 Install the other two mounting screws (JJ) (saved
from Assembly Step 1 "Prepairing for mounting") into
the holes in the fan-motor assembly (B) and tighten
firmly.
6.
 Fasten the blade (C) to the fan-motor assembly
(B) by the blade bracket screws(AA).
 Repeat this step for the remaining blade bracket.
7.
 Remove the three screws (VV) from the fan - motor
assembly (B).

Align the three holes in the light kit pan (D)Make
sure the notch in the light kit pan (D) Position the light kit
pan (D) and re-install the three screws (VV) that were
removed in the first step to secure the light kit pan (D).
6