Using Your Smart Humidifier - Levoit VeSync Classic 300S Manual Del Usuario

U S I N G Y O U R S M A R T H U M I D I F I E R
Note: Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 12).
1.
Plug in the humidifier. Press
your humidifier on.
Note: If there is no water in the tank,
10 times, and the humidifier will turn off. Fill the
water tank (see
Getting
2.
Tap repeatedly to cycle through mist
settings: Auto Mode, Low, Medium, and
[Figure 3.1]
High.
Note:
The humidifier will not mist in Auto Mode
•
if the humidity level is above 50%. If
you want the humidifier to keep misting,
change the mist setting, or change the
Auto Mode settings in the VeSync app.
For more information about Auto Mode,
•
see page 12.
3.
Rotate the nozzle to adjust the direction
[Figure
of the mist.
4.
Optionally, use the controls to activate
Sleep Mode, turn the night light on/off,
and more (see Controls, page 7).
5.
When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it
off. A healthy humidity level is between
[Figure
40% and 50%.
Note: You can also use Auto Mode to keep the
humidity level between 40% and 50%.
6.
Press to turn your humidifier off.
Note: If there is no water in the tank or the tank is
removed, the humidifier will stop misting,
flash 10 times, and the humidifier will turn off. Refill
the tank and properly place it on the base to use
your humidifier.
to turn
will flash
Started, page 8).
3.2]
3.3]
will
Figure 3.1
Figure 3.2
Figure 3.3
EN
11