Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The risk from these expo
sures varies, depending on
how often you do this type of
work. To reduce your expo
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4
Intended use
The router is designed for routing wood, plas
tics and wood-based materials.
If the cutters are used for the intended purpose
outlined in the Festool Sales, they may also be
used to machine aluminium and plasterboard.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
5
Technical data
Router
Rated current
Speed
Max. speed (no-load)
Quick depth adjustment
Fine depth adjustment
Drive shaft connecting
thread
Cutter diameter
Weight as per EPTA pro
cedure 01:2014:
6
Functional description
[1-1]
Adjusting wheel fine adjuster
[1-2]
Fine adjuster scale
[1-3]
Height adjustment rotary knob
[1-4]
Depth stop scale
[1-5]
Depth stop with indicator
OF 2200 EB-F
15 A
10000–22000 min
-1
23000 min
-1
3-5/32" (80 mm)
25/32" (20 mm)
M22 x 1.0
Max. 3-1/2"
(89 mm)
18.3 lbs (8.3 kg)
[1-6]
Depth stop clamp lever
[1-7]
Eccentric for coupling the depth stop
and the stepped stop
[1-8]
Stepped stop
[1-9]
Base runner replacement operating
lever
[1-10] Spindle stop
[1-11] Speed adjusting wheel
[2-1]
On/off switch locking button
[2-2]
On/off switch
[2-3]
Protective guard locking lever
[2-4]
Handles
[2-5]
Extractor stub
The pictures for the functional description are
on a fold-out page at the beginning of the in
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
Accessories shown or described are not always
included in the scope of delivery.
7
Commissioning
WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
7.1
Extension Cord
If an extension cord is required, it must have
sufficient cross-section to prevent an excessive
drop in voltage or overheating. An excessive
drop in voltage reduces the output and can lead
to failure of the motor. The table below shows
you the correct cord diameter as a function of
the cord length for this tool.
Cord Size in A.W.G
Tool`s Ampere Rating
3-6
6-8
English
Cord Length in Feet
25
50
100
150
18
16
16
14
18
16
14
12
9
Tabla de contenido
