Setting The Coffee Powder Quantity; Using The Coffee Powder Container - Silvercrest SKKM 200 A1 Instrucciones De Uso

♦ First select the recommended setting and then
adjust the grinder by 1–2 levels at a time until
you find the setting that suits you best.
Setting the coffee powder quantity
NOTE
The cup numbers next to the dial 9 are for
►
orientation purposes only. The amount of
coffee powder ground per cup depends on
the type of bean, the roast and the grinding
setting used.
► The cup setting is time-controlled: At each step,
the appliance grinds for approx. 6 seconds,
i.e. 1 cup for approx. 6 seconds, 2 cups for
approx. 12 seconds, etc. Depending on the
grinder setting, a larger or smaller amount of
coffee will be ground for the same cup setting.
With a finer grind, the coffee beans run
through the grinder more slowly than with a
coarse setting and a smaller volume of coffee
powder is produced.
► The amount of coffee powder you need to
make a cup of coffee typically depends on the
type of bean, the roast, the grind setting used,
cup size and your personal preferences. Try
out which combination of bean type, grind
setting and coffee powder quantity is best-
suited for your purposes.
♦ You can set a coffee powder quantity for 1‒
14 cups. Select the required quantity with the
dial 9.
SKKM 200 A1
Using the coffee powder container
1) Open the silicone plug r in the lid e of the
coffee powder container t by turning it to one
side.
2) Push the coffee powder container t into the
appliance under the output opening 7 so that
it sits stably in the round recess.
3) Press the start/stop button
grinding process. The grinding process stops
automatically as soon as the set quantity of
coffee powder is reached.
4) Use the start/stop button
adjust the amount of coffee powder as required.
NOTE
► Before removing the coffee powder container
t, tap it lightly on the housing in front of the
output opening 7 to knock any coffee
powder residue into the coffee powder
container t.
5) If you are grinding a large quantity of coffee
beans, remove the coffee powder container t
if necessary between grinds and shake it a little
to distribute the coffee powder evenly. Replace
the coffee powder container t in the housing
and press the start/stop button
new grinding process. As soon as the MAX
marking in the coffee powder container t is
reached, the container must be emptied.
6) Once you have ground enough coffee beans,
turn the dial 9 to the position OFF and remove
the mains plug from the socket.
0 to start the
0 to manually
0 to start a
GB │ IE │
7 ■