Layout And Items Supplied; Safety Regulations; Proper Use - EINHELL GC-CG 18 Li Manual De Instrucciones

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols (see Fig. 8)
1. Danger! Read the operating instructions and
follow the warnings and safety instructions.
2. Keep all other persons away from the danger
zone.
3. Danger! The cutter blades continue to run
after the motor is switched off . Wait for the
blades to come to a standstill. Risk of injury!
4. Store the battery only in dry rooms with an
ambient temperature of +10°C to +40°C.
Place only charged batteries in storage (char-
ged at least 40 to 60%).
5. Protect the tool from the damp and never ex-
pose it to rain.
6. Guaranteed sound power level
7. Safety class II
8. For use in dry rooms only.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
WARNING!
Read all safety warnings, instructions, illust-
rations and specifi cations provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Anl_GC_CG_18_Li_SPK13.indb 15 Anl_GC_CG_18_Li_SPK13.indb 15
GB

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Grass cutter blade
2. Blade release mechanism
3. Safety lock-off
4. On/Off switch
5. Shrub cutter blade
6. Grass cutter blade guard
7. Shrub cutter blade guard
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless grass and shrub shears
•
Original operating instructions
•
Safety instructions

3. Proper use

Grass shears:
The tool is designed for cutting the edges of
lawns and small areas of grass in private and
hobby gardens.
Shrub shears:
The tool is designed for cutting small hedges and
shrubs in private and hobby gardens. Tools de-
signed for use in private and hobby gardens are
- 15 -
01.06.2022 13:37:21 01.06.2022 13:37:21