Using The Appliance; Practical Hints - Krups GVX2 Manual De Instrucciones

USING THE APPLIANCE

1. Fit the ground coffee holder and its lid in their correct positions.
Check that the assembly is correctly positioned in the body (1).
2. Remove the lid and put coffee beans into the bean hopper. Do not
fill above the "max." level. Replace the bean hopper lid and make
certain that it is correctly positioned (2-3).
3. Set the quantity of ground coffee you want by positioning the
number of cups selector according to the desired quantity (4).
4. Set the ground coffee fineness by adjusting the grind setting
selector to the desired level (see § Practical Hints) (5)
5. Plug in.
6. Press the ON/OFF switch to start the appliance (6).
7. Once the selected quantity has been milled, the appliance will stop
automatically.
8. If you want to stop the appliance before then, press the ON/OFF
switch.
9. Remove the ground coffee holder, tap the receptacle gently, remove
the lid and pour the ground coffee obtained directly into the filter
of the coffee maker or use a measuring spoon to fill the Espresso
coffee maker (7).
10. To obtain additional ground coffee, you can repeat an operating
cycle by again pressing the ON/OFF switch. Always ensure that the
ground coffee does not go above the "max." level of the ground
coffee holder.
„
Selected settings will be retained from one use to the next.
Caution!
For your appliance to run correctly, make certain that:
„
The bean hopper lid is correctly positioned
„
The ground coffee holder and its lid are correctly placed in the
body of the appliance.
52

PRACTICAL HINTS

„
Keep your coffee beans in the refrigerator in a sealed container.
„
To keep your coffee's entire aroma, we advise you to grind your
coffee just a few moments before making it.
GRIND SETTING ADVICE
„
Use the grind setting selector to adjust the level of fineness of your
ground coffee according to the type of coffee maker you use and to
your taste.
„
On first use, you are advised to select an intermediate position
according to your type of coffee maker and then later adjust the
degree of fineness to your taste. Once you have used the appliance
a few times, you will find the ideal grind to suit you.
„
Do not change the grind setting when the mill is running.
Advice to select the number of cups:
„
Use the number of cups selector to program the quantity of ground
coffee you want.
„
The more cups you select, the longer the appliance will run.
MAINTENANCE
„
Always unplug your appliance before cleaning.
„
Never place the body of the appliance, power supply cord or plug in
water or under running water.
„
Do not use detergents or abrasive pads to clean the appliance.
„
Clean the lids and the ground coffee holder in warm, soapy water or
place them in the upper basket of your dishwasher.
„
Over time colour from the coffee beans may stain the plastic parts
of your appliance, this is normal. They may be cleaned by soaking
them in mild bleach (non abrasive) straight after use.
„
To remove the removable upper mill, set the grind selector to the
minimum position then take hold of the side flaps of the upper
mill with your fingers and turn clockwise, then raise it vertically to
remove (8-9)
„
Carefully clean the inside of the bean hopper using a damp cloth.
53