bbluv Igro Manual página 7

SETTING THE ALARM AND SNOOZE FUNCTIONS
• Press the ALARM
or off. A bell
the hour and minutes (below the double
dots) on the LCD screen when the alarm is
on.
• Press and hold the ALARM
2 seconds to access the alarm setting mode.
The time will flash. A bell
appear between the hour and minutes
(below the double dots). Select the hour with
the UP and DOWN arrows
ALARM
the minutes using the UP and DOWN arrows,
then press the ALARM
C
• If no key is pressed for 20 seconds, the system
will automatically save the configured data
and exit the alarm setting mode.
At the set time, the alarm will ring for two minutes.
The device rings at the following rates:
• 0-10 seconds: one beep per second;
• 11-26 seconds: two beeps per second;
• 27-58 seconds: four beeps per second;
• 59-120 seconds: continuous beeping until
2 minutes pass.
When the alarm is ringing, press the SNOOZE
button to activate snooze mode. A 'sleep' zz z
symbol will appear on screen between the hour
and minutes (above the double dots). Another
alarm will go off after 5 minutes. Press any other
key to stop the alarm.
E
key to turn the alarm on
symbol will appear between
key to switch to minutes. Select
E
Igrö
key for
E
symbol will also
and press the
C
key to exit setup.
E
EN
D
7