Troubleshooting - Optelec ClearReader+ Basic Manual Del Usuario

Optelec

6. Troubleshooting

If the power supply does not power the ClearReader

Check the connections. Make sure that the power supply is firmly connected to the
+
ClearReader

If the power supply still does not power the unit, contact your Optelec distributor.
If the text you are reading does not make sense.

Make sure your reading language is the language of your document.
If the text recognition takes unusually long before starting to read your document.

Make sure your reading language corresponds with the language of your document.
+
If the ClearReader Basic does not read the whole line of a document / column / table.

The automatic column recognition may be on. Press and hold the Scan button for 2
seconds to disable the column recognition and to switch to "TableMode".
+
If the ClearReader Basic does not respond to the Scan button.
 Open the camera arm and try it again.
 If the Scan button still does not respond, check if the unit is powered.
55
All manuals and user guides at all-guides.com
Basic and to the power outlet.
+
Basic.
+
ClearReader Basic
English