Tabla de contenido
ENCODING OF CD/PHONO INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE THE PHONO TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH
USB CONNECTING PORT OR SD/MMC CARD.
A) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO " PHONO " MODE AND THEN PRESS THE "
DIRECTLY.
2)
THE LCD DISPLAY WITH SHOW THE WORD "
(21)
OR DOWN
3)
THEN PRESS THE "
FLASHING, AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDS,.
4)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB OR SD.
5)
AFTER FINISH OF RECODING, PRESS AND HOLD THE "
FLASHING AND RETURN TO " PHONO " MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
-
THE SYSTEM WILL CREAT A " AUDIO " FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING RECORD MODE.
B) COPYING OF MP3 FILE
THE SYSTEM ALLOW TO COPY THE FILE FROM USB TO SD OR SD TO USB BY 1 FILES OR ALL FILES.
I) COPY 1 TRACK
REC
1.
PRESS "
" BUTTON (3) DURING THE PLAYBACK OF THE COPYING TRACK, UNIT WILL DISPLAY
"
" & "
" AND FLASHING. COPYING IS PERFORMING NOW.
2.
AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
II) COPY ALL TRACK
1.
INSERT THE USB STORAGE MEDIA OR SD/MMC CARD AND SET AT " STOP " MODE AFTER UNIT
READING.
REC
2.
PRESS "
" BUTTON (3) AND UNIT WILL DISPLAY "
PERFORMING NOW.
3.
AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:
REC
-
IF PRESS THE "
FROM USB TO SD OR SD TO USB.
-
THE SYSTEM WILL CREATE A " FCOPY " FOLDER AND STORE THE COPY TRACK INSIDE.
C) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM CD OR PHONO TO USB, THE
SELECTABLE RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1)
SET IN " PHONO " FUNCTION (7) & REMAIN STOP MODE.
2)
PRESS THE " INFO " FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3)
PRESS SKIP
(21) OR
4)
PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) RESUME TO " PHONO
" MODE
D) TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING.
EVERY TIME WHEN PRESS THE "
DURING ENCODING FROM PHONO TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND
CONTINUOUS THE RECRODING. THE TEXT " PHONO " AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN
THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
BUTTONS (13). TO SLEECT THE DESIRED SOURCE (USB OR SD) FOR ENCODING.
REC"
BUTTON (3), THE LCD DISPLAY WILL SHOW "
" BUTTON DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
BUTTON (13) TO SELECT THE DESIRED BITRATE FOR ENCODING.
" (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET
USB CARD
" AND FLASHING, THEN PRESS SKIP UP
REC
" BUTTON (3) UNTIL THE LCD STOP
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
" & "
E-4
REC
" BUTTON (3)
" & "
" AND
" AND FLASHING. COPYING IS
Tabla de contenido
