Attachments, Accessories And Their Operation; Affixing And Changing Attachments - Bamix Cordless Manual De Instrucciones

Attachments, accessories and their operation

Detailed information on attachments and other accessories (not included in the
scope of delivery) as well as their use (chopping, mincing, puréeing, beating, fluffing,
stirring, mixing, slicing) can be found in the instructions for use FULL INSTRUCTION
MANUAL at www.bamix.com

Affixing and changing attachments

Risk of injury! There is a risk of injury from sharp edges/blades and
rotating parts on all attachments! Always keep hair, clothing, fingers
etc. away from the attachments when working. Always wait until the
rotating parts have come to a complete stop before touching them!
This warning applies to all attachments!
Recess
Driving pin
Lock
If you take a closer look at the attachments, you will see a re-
cess.
The drive shaft stub of the bamix
Always remove the battery before changing attachments. Push
the attachment as straight as possible onto the stub so that the
drive pin engages in the recess on the attachment. Please make
sure that the attachment is exactly parallel to the cutter guard
and properly aligned with the stub.
To remove the attachment, first remove the battery, then just
pull it from the stub. If the attachment cannot be easily pulled
off, loosen it by placing the bamix
and switching the appliance on briefly. Remove the battery
again and pull off the attachment. If necessary, lever it off with a
suitable implement (e.g. screwdriver).
is equipped with a drive pin.
®
in hot dish-washing water
®
cordless
33