Leggett & Platt G-SMR-2 CUSTOM Manual De Operaciones página 4

READ ADVISORY INFORMATION IN THE OWNERS MANUAL CAREFULLY BEFORE USING THIS
PRODUCT. THE POTENTIAL FOR ELECTRICAL SHOCK EXISTS IF ELECTRICAL COMPONENTS ARE
NOT INSTALLED OR OPERATED PROPERLY.
Press and release a button and the base
will automatically move to the selected
position. To stop the base while in
motion, press and hold any button until
head up/down button
Press and hold to raise or lower the head
custom position set button
Press to capture any position and/or
function (massage and/or wave) of the
base as a programmed position.
To Program Custom Position:
1. Set the position (head and/or
foot) and/or function (massage
and/or wave) of the base to
the desired level.
2. Press and release the custom
position set button.
3. Press and release the custom
position recall button.
head massage buttons
Press and hold to increase or decrease
head massage intensity.
head massage on/off button
Switches the head massage on or off.
When switched on, the massage feature
will automatically shut off after 30
wave speed buttons
Press and hold—after the head and/or
foot massage, and the wave system have
been activated—to increase or decrease
REMOTE CONTROL REqUIRES FOUR (4) AAA SIzE BATTERIES. TO CONSERVE
BATTERY LIFE, THE TRANSMITTER TURNS OFF ALL FUNCTIONS WHEN ANY BUTTON
IS PRESSED FOR MORE THAN 50 SECONDS.
4
G-SMR-2 Custom Remote Control Operation Guide 99300822-e
g-smr-2 custom function
important information
position buttons
the base stops.
section.
minutes.
the wave speed.
transmission
indicator Light
Verifies a button is being pressed and
data is being sent to the base.
foot up/down button
Press and hold to raise or lower the foot
section.
LeveL button
Press to adjust the base to the flat
position. This button will also turn off the
massagers.
custom position recaLL button
Press to adjust the base to the custom
programmed position.
foot massage buttons
Press and hold to increase or decrease
foot massage intensity.
foot massage on/off button
Switches the foot massage on or off.
When switched on, the massage feature
will automatically shut off after 30
minutes.
wave on/off button
Press—once one or both massagers are
activated—to activate or deactivate the
wave vibration system.
note