atmosphere 10-1076 Manual Del Propietário página 17

8. With the pre-fi lter facing out, reinstall the combined fi lter assembly by fi rst
placing the bottom of the frame into the slots at the bottom of the housing
(Fig. 29a).
9. Swing the fi lters in place making sure the two tabs on the frame fi t into the
slots on each side of the housing (Fig. 29).
10. Reattach the front cover by aligning the four black pegs on the back of the
cover with the four corresponding holes on the housing (Fig. 30).
11. Starting with the top two, push the four black pegs into the holes (Fig. 30a).
12. Plug-in Air Purifi er and turn-on power.
13. Reset the odor fi lter monitor using the tip of a ballpoint pen or the end of
a paper clip (Fig. 31). Press and hold the odor fi lter reset button until it
beeps. The odor fi lter replacement light will turn from red to green.
15
Fig. 29a
Fig. 29
Fig. 30a
Fig. 30
Fig. 31