Graef MS 61 Manual De Instrucciones página 10

erly installed protective conductor
system. Operation on a socket with-
out a protective conductor is prohib-
ited. If in doubt, have the building
installation checked by an electrician.
EN
The manufacturer does not assume any
responsibility for damages caused by a
missing or interrupted protective con-
ductor.
Before the first use
Remove the protective cap between
the base station and the tank. Before
using the unit for the first time, clean
as described in the Cleaning chapter.
iMPORtANt
Let the unit cool off between uses.
Making milk froth
Connect the unit to the mains supply:
■
Remove the cap and insert the attach-
ment for warm
milk froth.
■
Fill the desired amount of milk in the
tank.
iMPORtAN
Comply with the "max" mark.
Never fill any more milk than that
into the tank. Frothed milk ex-
pands; if the filling level is too high
it will overflow the tank.
■
Put the cap on the tank.
■
Start preparation by pressing the corre-
sponding "on" button. The LED is illu-
minated as long as the unit is running.
iMPORtANt!
Preparation stops automatically
after 60 - 90 seconds, depending
on the filling level.
■
Open the cap after preparation has fin-
ished and pull it up.
10
All manuals and user guides at all-guides.com
!
or cold
t!
■
Pour or ladle the milk froth into a cup
or glass.
■
After using the unit, clean it as de-
scribed in the Cleaning
Warming up milk
Warming up milk differs from making
milk froth in the following points:
■
Remove the attachment for milk froth.
■
Fill the desired amount of milk in the
stainless steel tank.
■
The rest of the steps are identical to
making warm milk froth.
Cleaning
■
Clean the exterior of the unit with a
soft, moist cloth. If heavily soiled, a
mild detergent can be used.
■
Rinse out the tank with hot water after
use. If there is stubborn soiling in the
inside of the stainless steel tank, wash
it out with a soap solution and rinse
thoroughly.
Disposal
At the end of its service life, this prod-
uct must not be disposed through nor-
mal domestic waste; rather it must be
disposed at a collection point for recy-
cling electronic domestic refuse. The
symbol on the product and in the op-
erating instructions points this out. The
materials can be recycled in accordance
with their markings. By recycling, mak-
ing use of the materials or other forms
of recycling old units you are making
an important contribution to protect-
ing our environment. Please ask your
municipal administration about the re-
sponsible disposal sites.