M.V.6000 M0S10367 1T03 BOZZA:Layout 1
• Please pay careful attention when clea-
ning wooden and treated terracotta floo-
ring as prolonged use of steam may da-
mage the wax, polish or colour of
surfaces to be cleaned. We therefore re-
commend adjustment the steam to mini-
mum (if your appliance has steam adju-
stment) and never direct the jet of steam
directly on the surface, but cover the brush
with a cloth. Do not keep spraying steam
in the same place.
For wooden surfaces (furniture, doors,
etc.), we recommend cleaning with a cloth
which has been steamed previously.
• Also on particularly delicate surfaces (e.g.
synthetic materials, lacquered surfaces
etc.) it is recommended to always cover
the brushes with a cloth and to use steam
to a minimum.
• If cleaning glass surfaces in particularly
low temperatures preheat the glass using
the hand gun from about 50 centimetres
distance from the surface to be cleaned.
• For care of your plants vaporise at a mini-
mum distance of 50 centimetres.
MUL TIPURPOSE BRUSH (10)
This brush is intended for use on large sur-
faces, tiled and stone floors, hardwood
floors, carpets, etc..
• Brush attachment (11), for vacuuming
only.
• Liquid vacuum attachment (12), for vacu-
uming up spills on smooth surfaces.
• Carpet attachment (13), for carpets and
rugs.
The multipurpose brush may be connected
to the hose with the extension tubes (9) or
attached directly to the handle.
Assembling the multipurpose brush:
To apply different attachments to the multi-
purpose brush, push the two slides (10a) on
the back of the brush outwards and apply
the attachment recommended for the type of
surface you wish to clean. Push the two
slides (10a) inwards to lock the attachment
in place.
All manuals and user guides at all-guides.com
09/10/2013
MONDIAL VAP 6000
IMPORTANT: please read the section on
"Recommendations for use of accessories".
the
This accessory is recommended for cleaning
hard-to-reach corners which are difficult to
clean with other accessories, such as:
• pre-treating stains on carpets or rugs be-
• cleaning stainless steel, glass, mirrors,
• cleaning hard-to-reach corners such as
• cleaning around the base of taps;
• cleaning shutters, radiators, car interiors;
• spraying houseplants from a distance;
• eliminating odours and creases from cloth-
The 120° tool may be applied directly to the
handle (2) or connected to the hose with ex-
tension tubes (9). The 120° tool may be
used in combination with the following ac-
cessories:
• Coloured 120° brushes (15), recom-
• Steam nozzle (16), recommended for get-
• 120° tool nozzle (17), recommended for
22
9.13
Pagina 22
120° TOOL (14)
fore using the brush on them;
coated surfaces and enamel;
stairs, window frames, door jambs, alu-
minium sections;
ing.
mended for removing encrustations from
narrow surfaces such as gas rings, shut-
ters, spaces between tiles, bathroom fix-
tures, etc.. They are colour-coded so that
you can always use the same brush for
the same surface.
ting into hard-to-reach corners and clean-
ing radiators, door and window frames,
bathroom fixtures and shutters. To con-
nect the nozzle to the 120° tool simply
screw it on just like the coloured brushes,
which can in turn be screwed onto the
nozzle. TAKE CARE WHEN APPLYING,
THE METAL TIP OF THE NOZZLE RE-
MAINS VERY HOT FOR SOME TIME AF-
TER USE.
vacuuming up dirt that has been dislodged
from narrow surfaces such as the gaps
between tiles, door jambs, gaps in shut-
ters, etc..