Assembly - Senix LSPG-L3 Manual Del Operador

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Make sure
to service engine with gasoline and oil as instructed in the Engine
Manual before starting or running the machine.
NOTE: Reference to right and left hand side of the Lawn Mower is observed from
the operating position.
OPENING CARTON
1. Cut each corner of the carton vertically from top to bottom.
2. Remove all loose parts.
3. Remove loose packing material.
REMOVING UNIT FROM CARTON
1. Lift unit from the rear to detach it from underlying carton material and roll unit
out of carton.
2. Check carton thoroughly for any other loose parts.
Assembly parts in carton
• Rear Trailing Shield
• Bottle of oil
• User Manual/Engine Manual

ASSEMBLY

Attach Handle
IMPORTANT: Do not crimp the cables when assembling the handle.
1. Raise handle from folding position to working position (Figure 2).
2. Apply a pressure to the lower handle so it can be pivoted and located into the
handle holder slots of the mower. Release and check for installation (Figure 3).
3. Tighten star knobs for connecting the upper handle with lower handle (Figure 4).
8
ASSEMBLY
Figure 2
Figure 3
Figure 4
WWW.SENIXTOOLS.COM