Blumfeldt Queensway Manual De Instrucciones página 14

EN
14
TROUBLESHOOTING
Problem
No ticking sound but
after inserting the
battery, the clock
moves.
The clock does not
work, stops or does not
work properly.
The movement gear
wobbles in the rear
case and the clock does
not hang straight.
Potential cause
You have bought a
completely silent
watch.
You are using an
alkaline battery.
The hands of the clock
stick together, touch
each other or touch the
frame of the clock.
The nut holding the
clock and movement
has come loose during
transport.
Possible solution
After inserting the
battery, see the gears
turning in the gearbox
above the battery; let
the clock run and check
the time later.
Replace the alkaline
battery with a zinc-
carbon battery.
Bend the clock hands
straight so that they
do not scratch each
other or the frame.
Then turn the red knob
on the movement and
rotate the minute
hand two full turns to
make sure the hands
are correct. Then set
the correct time using
the red button on the
movement.
Align the gearbox and
hold it while tightening
the nut under the clock
hands with a small pair
of needle-nose pliers
(do not over-tighten).